13″ 5 Fuller Yugal Blocker Gripper Handle Khukuri-Hand Forged Bushcraft Khukuri-Handmade By Ex-Gurkha Khukuri House In Nepal

Blade Size	13"
Handle Size	5.5"
Blade Material	High Graded 5160 Carbon Steel
Handle Material	Rosewood
Blade Type	Hand Forged, Unpolished
Handle Type	Blocker, Full Tang

This 13″ 5 Fullers Yugal Blocker Gripper Handle is similar to an Ang Khola but with 5 fullers. It is made in Angkhola village (eastern Nepal). This khukuri, however, has aunique blade & handle, making the blade a little broader. The Bow and Arrow symbol on the ricasso shows that this was made by Bashu Kaami (The blade smith working under Ex Gurkha Khukuri House Nepal). I etched this blade to show the hamon line (harder metal shows up as bright, softer metal shows up as dark when an acid is applied to it). The hardened area is consistent and runs from the tip to just before the cho, an ideal khukuri hamon. As a result of the acid etch though, I’ve taken this from it’s original polish down to a 200 grit satin. I filed down the ring in the middle of the handle this is full tang blade. The blade is therefore visible all around the handle. The handle has been joined strongly to the blade which we can also be seen at the sides. The handle of this khukuri is full tang. The blade is made of Highly Graded Carbon with balanced temper on the edge of the blade therefore its very strong. The main reason to be single piece from the handle side is to grip the metal piece too while using. The steps on the blade so that while work with the knife it doesn’t strike and can easily re-charge the knife and complete the work easily and comfortably. The handle we made as custom order in Y shape. When you work with this type of handle hand is doesn’t sleep from handle. This blade can be used to chop wood, bone cleaning bushes. All Khukuris have two pockets on the back of the scabbard which hold a blunt steel called “chakmak” for sharpening the blade or for striking spark from flint and a little knife known as “karda” used for skinning small animals such as rabbits.The notch (kaura or kaudi) in the blade near the hilt of most khukuris serves as conduit for the blood on the blade to drip out, thus preventing it from soiling the hilt, as well as a device for catching and neutralizing and enemy blade.

Material Used Highly Graded Carbon Steel 5160, water Buffalo Leather for Scabbard(outside) and rosewood for the Handle, Pinewood for the Scabbard (inside), Brass, white metal and “Laha” ( Nepali Traditional Glue).
Blade Size and Type 13 inch (33.02cm), Hand Forged Unpolished Blade.
Handle Size and Type 5.5 inch (13.97 cm) full tang rosewood blocker gripper Handle.
Upper Spine 6 mm.
Lower Spine 3 mm.
Handle Circumference 5 Inch.
Belly 2.4 Inch.
Hardness of steel Spine=22-25 RC, Belly=45-46 RC, Edge=58-60 RC.
Weight(Gms) 900.0000